Epilog Fiber Laser Systems

By Epilog Laser

Epilog Laser's metal engraving, etching and marking laser systems for metals like aluminum, steel, brass and copper.

Epilog's Fiber Laser series is your solution for etching and marking all types of bare metals and plastics. Print to the laser directly from any graphic software program for easy job setup, and etch an entire table full of parts at one time.

  • Directly engrave on most metals.
  • Mark engineered plastics with your logo.
  • Etch barcodes, serial numbers, and images.

Get Pricing Info

Epilog FiberMark Tech Specs
System Details

Epilog FiberMark 24 Epilog FiberMark Fusion
Engraving Area 24" x 12"
(610 x 305 mm)
32" x 20"
(812 x 508 mm)
Focal Length (F-Theta Lens) 3" (76.2 mm) 5" (127 mm)
Maximum Material Thickness 5" (127 mm) 11.25" (285 mm)
Laser Wattage 20, 30, or 50 watts
Laser Type Solid State Pulsed Ytterbium Fiber Laser (air cooled).
Mode of Operation Pulsed 20-80 kHZ.
Repetition Rate (Frequency) 20 kHZ - 100 kHz depending on the laser wattage.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved. Multiple file storage up to 128 MB.
Air Assist Attach the included air compressor to our Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the marking surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's FiberMark Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (FM Fusion) with the convenient Movable Home Position features on the FiberMark Laser.
Operating Modes Raster, vector or combined modes.
Motion Control System High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel long-lasting bearing system. Self lubricating on the FiberMark Fusion
Belts Advanced B-style Kevlar belts. Double-wide Kevlar (x-axis) and Steel Cord (y-axis) belts.
Resolution User controlled from 75 to 1200 dpi
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8.
Size (W x D x H) 34.5" x 24.5" x 16"
(876 x 622 x 406 mm)
52.5" x 33.5" x 40.75"
(1334 x 851 x 1035 mm)
Weight 120 lbs (55 kg)without stand 500 lbs (227 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight 200 lbs (90 kg) for static and 80 lbs (36 kg) for lifiting. 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System External exhaust or internal filtration system is required via single 4" (101.6 mm) output port. External exhaust or internal filtration system is required via two 4" (101.6 mm) output ports.